|
|
|
National Stock Number:
5315-01-093-0064
Federal Supply Class:
5315
National Item Identification Number:
010930064
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 49M61-25R01 ITEM 3 | 96169 | ELECTRIC BOAT CORPORATION | | 600-4646747 ITEM 3 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | SHORT SHANK END | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-24059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | OVERALL LENGTH | 2.375 INCHES MINIMUM AND 2.377 INCHES MAXIMUM | | SECOND END COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL | | SECOND END COUNTERSINK DIAMETER | 0.530 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | COUNTERSUNK | | SHANK DIAMETER | 0.887 INCHES MINIMUM AND 0.889 INCHES MAXIMUM | | SHANK LENGTH | 0.929 INCHES NOMINAL | | SHOULDER DIAMETER | 0.990 INCHES MINIMUM AND 0.992 INCHES MAXIMUM | | STYLE DESIGNATOR | UNDERCUT | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) | | UNDERCUT DIAMETER | 0.704 INCHES NOMINAL | | UNDERCUT WIDTH | 0.180 INCHES NOMINAL |
|
|