|
|
|
National Stock Number:
5315-01-316-1574
Federal Supply Class:
5315
National Item Identification Number:
013161574
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 6146560 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.565 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | THREADED END | | FIRST HOLE DIAMETER | 0.220 INCHES MINIMUM AND 0.229 INCHES MAXIMUM | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | HARDNESS RATING | | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1045 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | OVERALL LENGTH | 1.560 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM | | SECOND END TIP RADIUS | 0.250 INCHES NOMINAL | | SHANK DIAMETER | 0.500 INCHES NOMINAL | | SHANK LENGTH | 0.454 INCHES NOMINAL | | SHOULDER DIAMETER | 1.125 INCHES NOMINAL | | STYLE DESIGNATOR | UNDERCUT | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.394 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) | | UNDERCUT DIAMETER | 0.384 INCHES MINIMUM AND 0.389 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.231 INCHES MINIMUM AND 0.241 INCHES MAXIMUM |
|
|