5315-01-359-2443, PIN,STRAIGHT,HEADED

National Stock Number:
5315-01-359-2443

Federal Supply Class:
5315

National Item Identification Number:
013592443

Description:
PIN,STRAIGHT,HEADED

Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.

Manufacturer Information:

MIL-P-5673	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS20392-5R91	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NASM5673	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS20392-5R91	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CHAMFER LENGTH	0.078 INCHES NOMINAL0.078 INCHES NOMINAL
DIAMETER	0.371 INCHES MINIMUM AND 0.371 INCHES MINIMUM AND 0.373 INCHES MAXIMUM0.373 INCHES MAXIMUM
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN	0.135 INCHES NOMINAL0.135 INCHES NOMINAL
FIRST HOLE DIAMETER	0.096 INCHES MINIMUM AND 0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM0.116 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
HEIGHT	0.062 INCHES NOMINAL0.062 INCHES NOMINAL
HOLE ARRANGEMENT STYLE	ONE END DRILLEDONE END DRILLED
PIN CHAMFER ANGLE	15.0 DEGREES NOMINAL15.0 DEGREES NOMINAL
PIN HEAD DIAMETER	0.500 INCHES NOMINAL0.500 INCHES NOMINAL
SHEAR STRENGTH	27620 DOUBLE POUND27620 DOUBLE POUND
STYLE DESIGNATOR	STRAIGHTSTRAIGHT
UNDER HEAD LENGTH	3.022 INCHES MINIMUM AND 3.022 INCHES MINIMUM AND 3.042 INCHES MAXIMUM3.042 INCHES MAXIMUM

Click here to Register for Free 30-day Trial