|
|
|
National Stock Number:
5315-01-467-2682
Federal Supply Class:
5315
National Item Identification Number:
014672682
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 12387350-8C59 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| CHAMFER LENGTH | 0.078 INCHES NOMINAL | | DIAMETER | 0.560 INCHES MINIMUM AND 0.562 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.093 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6300 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8740 OVERALL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.687 INCHES NOMINAL | | SPECIAL FEATURES | SHANK END OF PINS MAY BE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDER;PINS SHALL BE FREE OF BURRS AND SHARP EDGES;DIMENTIONS ARE SHOWN AFTER FINISH;PINS FABRICATED FROM 4130 STEEL ALLOY (UNS G41300)AND CADMIUM PLATED PER QQ-P-416, TYPE 2, CLASS 2 MAY BE USED UNTIL EXISTING STOCKS ARE COMPLETED;PINSHALL BE IN ACCORDANCE WITH REQUIREMENTS OF MS20392, ALLOY STEEL, EXCEPT FOR PROTECTIVE FINISH SPECIFIED HEREON;PROTECTIVE FINISH 1.9.2.2 OF MIL-STD-171;END ITEM ABG560 | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE2,CLASS2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | UNDER HEAD LENGTH | 2.079 INCHES NOMINAL |
|
|