|
|
|
National Stock Number:
5315-01-467-6325
Federal Supply Class:
5315
National Item Identification Number:
014676325
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 13566023 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 13566023-1 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A580 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.005 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | PIN OVERALL LENGTH | 4.245 INCHES MINIMUM AND | | 4.275 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.0880 INCHES MINIMUM AND | | 0.0900 INCHES MAXIMUM | | SPECIAL FEATURES | REMOVE ALL BURRS AND SHARP EDGES;FOR USE WITH HINGES COVERED BY MS20257 AND MS20001;AL ALLOY HINGE HALVES, USE CADMIUM PLATED PIN | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, HINGE |
|
|