|
|
|
National Stock Number:
5315-01-467-8380
Federal Supply Class:
5315
National Item Identification Number:
014678380
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 92007A1156 | 01365 | MARINE CORPS LOGISTICS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE-MICC LOGISTICS OPERATIONS CENTER |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5630,CLASS440C ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 56.0 ROCKWELL C NOMINAL OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.330 INCHES MINIMUM AND | | 0.350 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.188 INCHES NOMINAL | | SHANK DIAMETER | 0.240 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | OVERALL LENGTH | 0.720 INCHES MINIMUM AND | | 0.730 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | RADIUS | | SECOND END CORNER RADIUS | 0.005 INCHES MAXIMUM | | FIRST END LOCATION | CHAMFERED END | | SPECIAL FEATURES | END ITEM LIGHT ARMORED VEHICLE;CHAMFER WIDTH0.030 NOMINALLY;HEAT TREATMENT PER MIL-H-6875,QUENCH AND TEMPER AT A MAX TEMP OF 450 DEGREES F FOR A MINIMUM OF 56 ROCKWELL C;UNLESS OTHERWISE SPECIFIED,THE RELATIONSHIP BETWEEN ANY TWO COAXIAL CIRCULAR FEATURES SHALL BE CONTROLLED BY A CIRCULAR RUNOUT TOLERANCE EQUAL TO THE SUM OF THE SIZE TOLERANCES FOR THE FEATURES |
|
|