|
|
|
National Stock Number:
5315-01-471-1893
Federal Supply Class:
5315
National Item Identification Number:
014711893
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 7-366710025 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | 7-367310025 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | 7-367310025-21 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC | | 7-367310025-21 | 8V613 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 630 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643,CONDA ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHOULDER DIAMETER | 1.000 INCHES NOMINAL | | OVERALL LENGTH | 5.250 INCHES NOMINAL | | FIRST STEP DIAMETER | 0.663 INCHES NOMINAL | | SECOND STEP DIAMETER | 0.620 INCHES MINIMUM AND | | 0.625 INCHES MAXIMUM | | SECOND STEP LENGTH | 1.000 INCHES NOMINAL | | THIRD STEP DIAMETER | 0.435 INCHES MINIMUM AND | | 0.436 INCHES MAXIMUM | | THIRD STEP LENGTH | 1.380 INCHES NOMINAL | | SHOULDER LENGTH | 1.740 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.100 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED W/THRU HOLE | | SECOND END TAPER LENGTH | 0.030 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | UNTHREADED END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.750 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.130 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.150 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL |
|
|