|
|
|
National Stock Number:
5315-01-536-1337
Federal Supply Class:
5315
National Item Identification Number:
015361337
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 55003 | 99643 | EATON AEROSPACE LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 440C OVERALL | | HARDNESS RATING | 57.0 ROCKWELL C MINIMUM AND | | 60.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.140 INCHES NOMINAL | | SHOULDER DIAMETER | 0.395 INCHES MINIMUM AND | | 0.405 INCHES MAXIMUM | | SHANK DIAMETER | 0.134 INCHES MINIMUM AND | | 0.144 INCHES MAXIMUM | | OVERALL LENGTH | 1.030 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.134 INCHES MINIMUM AND | | 0.144 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.070 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.188 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.330 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | THREADED END | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.140 INCHES NOMINAL | | SPECIAL FEATURES | SHOULDER IS OVAL 0.275 IN MIN AND0.285 IN MAX WIDTH AND IS OFFSET 0.135IN MIN AND 0.145 IN MAX FROM ONE SIDE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, DETENT |
|
|