|
|
|
National Stock Number:
5320-00-036-7080
Federal Supply Class:
5320
National Item Identification Number:
000367080
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| ASPFF-DT10-14 | 17446 | HUCK INTERNATIONAL, INC | | ASPFF-DT10-14 | 29666 | HUCK MFG CO | | GB512F10-14 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB512F10-14 | 98524 | MONOGRAM AEROSPACE FASTENERS, INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | HEAT TREATMENT | AS FABRICATED OVERALL | | SHEAR STRENGTH | 108000 SINGLE POUNDS PER SQUARE INCH | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.634 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | FASTENER LENGTH | 0.910 INCHES MINIMUM AND | | 0.930 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.125 INCHES NOMINAL | | SHANK DIAMETER | 0.3255 INCHES MINIMUM AND | | 0.3275 INCHES MAXIMUM | | GRIP LENGTH | 0.813 INCHES MINIMUM AND | | 0.875 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNS | | NOMINAL THREAD SIZE | 0.250 INCHES | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 40 | | THREAD DIRECTION | RIGHT-HAND |
|
|