|
|
|
National Stock Number:
5320-00-582-3504
Federal Supply Class:
5320
National Item Identification Number:
005823504
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| CR162-5-10 | 11815 | SPS TECHNOLOGIES, LLC | | CR162C5-10 | 11815 | SPS TECHNOLOGIES, LLC | | CR9162-5-5 | 11815 | SPS TECHNOLOGIES, LLC | | CR9162-5-5 | F7652 | KLX AEROSPACE SOLUTIONS II SAS | | CR9162-5-5 | FB009 | KLX INC | | CR9162-5-5 | R1120 | SATAIR A/S | | RV201C5-5 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | MS20601AD5W5 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RV201-5-5 | 98996 | OLYMPIC FASTENING SYSTEMS INC | | RV201C5-5 | 98996 | OLYMPIC FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.441 INCHES MAXIMUM | | GRIP LENGTH | 0.251 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BODY | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE STEM | | MATERIAL | ALUMINUM ALLOY 2017 STEM | | MATERIAL | ALUMINUM ALLOY 2117 BODY | | SHANK DIAMETER | 0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM | | SHANK STYLE | SELF-PLUGGING | | SHEAR STRENGTH | 540 SINGLE POUNDS PER SQUARE INCH | | SPECIAL FEATURES | W/SPECIAL PULLING HEAD | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OR OXIDE FILM OVERALL |
|
|