|
|
|
National Stock Number:
5320-01-025-1810
Federal Supply Class:
5320
National Item Identification Number:
010251810
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 03A081C3-2 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 10123952 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5320-005-0002 | 04614 | TEXTRON SYSTEMS CORPORATION | | 3M949-3-2 | 76301 | THE BOEING COMPANY | | 3D0142C3-2 | 88277 | THE BOEING COMPANY | | 5320PL2180888 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 9025M79P02 | 07482 | GENERAL ELECTRIC COMPANY | | BACR15DR3A2 | 11815 | SPS TECHNOLOGIES, LLC | | CCR264CS-3-02 | 11815 | SPS TECHNOLOGIES, LLC | | CCR264CS-3-2 | 11815 | SPS TECHNOLOGIES, LLC | | AF5141-3-2 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | BACR15DR3A2 | 81205 | THE BOEING COMPANY | | CCR264CS-3-2 | C7839 | WILDE, ROSWITHA TRADING | | CCR264CS-3-2 | F7652 | KLX AEROSPACE SOLUTIONS II SAS | | GR501AC3C2 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | ST1209-02 | 77445 | RTX CORPORATION | | HS5422C3125 | 8V613 | THE BOEING COMPANY | | RV541A3-2 | 98996 | OLYMPIC FASTENING SYSTEMS INC | | JJ54297 | D3309 | MTU AERO ENGINES AG DBA MTU DEUTSCHE AEROSPACE | | CCR264CS3-2 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | CCR264CS-3-2 | FB009 | KLX INC | | FON2-6394-3C2 | H1822 | FOKKER AEROSTRUCTURES B.V. | | CCR264CS-3-2 | R1120 | SATAIR A/S |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | EXPANSION DEVICE | THREADED STEM | | FASTENER LENGTH | 0.281 INCHES MAXIMUM | | GRIP LENGTH | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.183 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | MATERIAL | IRON ALLOY 660 SLEEVE | | MATERIAL | STEEL COMP 305 STEM | | PROPRIETARY CHARACTERISTICS | PACS | | SHANK DIAMETER | 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM | | SURFACE TREATMENT | PASSIVATE STEM |
|
|