| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| FASTENER LENGTH | 0.303 INCHES NOMINAL |
| GRIP LENGTH | 0.120 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| HARDNESS RATING | 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| HEAD MAJOR DIAMETER | 0.386 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES MECHANICAL LOCK |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A331 ASSN STD ALL MATERIAL RESPONSES SLEEVE |
| MATERIAL | STEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1144 OR STEEL COMP 4037 OR STEEL COMP 4130 MECHANICAL LOCK |
| MATERIAL | STEEL COMP 4027 OR STEEL COMP 4037 SLEEVE |
| MATERIAL | STEEL COMP 8740 STEM |
| SHANK DIAMETER | 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| SHANK STYLE | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| SHEAR STRENGTH | 112000 SINGLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | SINGLE ACTION FASTENER INSTALLED WITH A SINGLE ACTION TOOL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 MIL SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT | ALUMINUM SLEEVE |
| SURFACE TREATMENT | ALUMINUM STEM |
| SURFACE TREATMENT | ALUMINUM MECHANICAL LOCK |