|
|
|
National Stock Number:
5340-00-050-3014
Federal Supply Class:
5340
National Item Identification Number:
000503014
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A-A-55586 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | A-A-55586-8 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA55586-8 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS27966-8 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | KNUCKLE QUANTITY | 5 | | PERFORMANCE TYPE | NOT RATED | | MATERIAL AND LOCATION | BRASS, QQ-B-626, COMP 11 PIN AND | | STEEL, FED STD 66, COMP 302, 303, OR 304 PIN | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT AND LOCATION | CADMIUM, QQ-P-416, TYPE 2, CLASS 2 BODY AND | | ZINC, QQ-Z-325, TYPE 2, CLASS 2 BODY | | MATERIAL THICKNESS | 0.079 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.157 INCHES NOMINAL | | BODY WIDTH | 2.440 INCHES MINIMUM AND | | 2.560 INCHES MAXIMUM | | PIN CENTER TO BODY EDGE DISTANCE | 0.937 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE TYPE | FRICTION | | MOUNTING HOLE QUANTITY | 6 | | SPEC/STD CONTROLLING DATA | | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | A-A-55586 | | MANUFACTURERS CODE | 58536 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AA55586-8 |
|
|