|
|
|
National Stock Number:
5340-00-050-3083
Federal Supply Class:
5340
National Item Identification Number:
000503083
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| A-A-226 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | ANSI/BHMA A156.1 | 80204 | AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED | | FF-H-00116 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| PIN REMOVABILITY | NONREMOVABLE | | REVERSIBLE FEATURE | NOT INCLUDED | | KNUCKLE QUANTITY | 5 | | PERFORMANCE TYPE | NOT RATED | | MATERIAL AND LOCATION | STEEL, WROUGHT BODY AND | | BRASS PIN OR | | STEEL, CORROSION RESISTING PIN | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT AND LOCATION | ZINC COATED ELECTROPLATED | | MATERIAL THICKNESS | 0.130 INCHES NOMINAL | | MOUNTING HOLE DIAMETER | 0.193 INCHES NOMINAL | | BODY WIDTH | 4.000 INCHES NOMINAL | | PIN CENTER TO BODY EDGE DISTANCE | 2.000 INCHES NOMINAL | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE TYPE | BALL BEARING | | MOUNTING HOLE QUANTITY | 6 |
|
|