| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.530 INCHES MINIMUM AND 0.550 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.420 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | B50T13A,GENERAL ELECTRIC CO. MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.300 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.710 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END RADIUS | 0.710 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.710 INCHES NOMINAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| SECOND LEG WIDTH | 1.420 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |