5340-00-646-8377, BRACKET,DOUBLE ANGLE

3040-00-646-8378 BRACKET,EYE,NONROTATING SHAFT

National Stock Number:
5340-00-646-8377

Federal Supply Class:
5340

National Item Identification Number:
006468377

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

9032493

18876

U S ARMY AVIATION AND MISSILE COMMAND

Techincal Specification:

FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	FOUR HOLES
FIRST LEG HOLE DIAMETER	0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	1.375 INCHES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	1.250 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL
FIRST LEG STYLE	SQUARE
FIRST LEG WIDTH	2.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-741 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	1.718 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	FOUR HOLES
SECOND LEG HOLE DIAMETER	0.277 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	4.218 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.250 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.282 INCHES NOMINAL
SECOND LEG WIDTH	6.000 INCHES NOMINAL
SECOND LEG STYLE	SQUARE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	TT-C-490 TY 1 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PHOSPHATE

Click here to Register for Free 30-day Trial