|
|
|
National Stock Number:
5340-01-113-9904
Federal Supply Class:
5340
National Item Identification Number:
011139904
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 6N1199 | 11083 | CATERPILLAR INC |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 0.580 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.104 INCHES MINIMUM AND 0.136 INCHES MAXIMUM | | CENTER SECTION WIDTH | 1.000 INCHES NOMINAL | | FIRST LEG ANGLE | 135.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG STYLE | EXTENDED FLAT | | FIRST LEG THICKNESS | 0.104 INCHES MINIMUM AND 0.136 INCHES MAXIMUM | | FIRST LEG WIDTH | 1.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | 1E357 FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 135.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.422 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.104 INCHES MINIMUM AND 0.136 INCHES MAXIMUM | | SECOND LEG WIDTH | 1.000 INCHES NOMINAL | | SECOND LEG LENGTH | 1.310 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | SQUARE | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|