5340-01-174-8797, BRACKET,DOUBLE ANGLE

National Stock Number:
5340-01-174-8797

Federal Supply Class:
5340

National Item Identification Number:
011748797

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

443868	77445	RTX CORPORATION
65-11659-815	82918	THE BOEING COMPANY

Techincal Specification:

CENTER SECTION HEIGHT	1.350 INCHES NOMINAL
CENTER SECTION THICKNESS	0.063 INCHES NOMINAL
CENTER SECTION WIDTH	0.600 INCHES NOMINAL
FIRST LEG ANGLE	100.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.300 INCHES NOMINAL
FIRST LEG END RADIUS	0.300 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	ONE HOLE
FIRST LEG HOLE DIAMETER	0.342 INCHES MINIMUM AND 0.354 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.300 INCHES NOMINAL
FIRST LEG STYLE	END RADIUS
FIRST LEG THICKNESS	0.063 INCHES NOMINAL
FIRST LEG WIDTH	0.600 INCHES NOMINAL
FIRST LEG LENGTH	0.900 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 301 OR STEEL COMP 302
MOUNTING HOLE TYPE	PLAIN
SECOND LEG ANGLE	88.0 DEGREES NOMINAL
SECOND LEG END RADIUS	0.300 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
SECOND LEG HOLE DIAMETER	0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.300 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.300 INCHES NOMINAL
SECOND LEG THICKNESS	0.063 INCHES NOMINAL
SECOND LEG WIDTH	0.600 INCHES NOMINAL
SECOND LEG LENGTH	1.550 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG STYLE	END RADIUS
STYLE DESIGNATOR	DOUBLE ANGLE

Click here to Register for Free 30-day Trial