| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.430 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.020 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| FIRST LEG ANGLE | 0.060 RADIANS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.050 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| FIRST LEG WIDTH | 41.000 INCHES MINIMUM AND 41.060 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | ANGLE |
| MATERIAL | NICKEL ALLOY 625 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG LENGTH | 0.880 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG WIDTH | 41.000 INCHES MINIMUM AND 41.060 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG THICKNESS | 0.008 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | STYLE DIFFERS FROM ONE CHOSEN IN THAT THERE ARE 35 HOLES INSTEAD OF 1 AND THEY ARE ALL EVENLY SPACED OVER A AREA OF 38.810 TO 38.930 INCHES AND ARE ON THE SAME HORIZONTAL AXIS;LEG 2 IS O.O50 INCHES THICK FROM ANGLE OUT 0.700 TO 0.760 INCHES AND THEN BEGIONS TO TAPER DOWN TO 0.008 TO 0.024 INCHES |