| STYLE DESIGNATOR | SINGLE LOOP |
| MATERIAL | STEEL COMP 321 BAND |
| RUBBER CHLOROPRENE CLASS CR CUSHION |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE BAND |
| AMS 3209 AND OZONE RESISTANCE REQ.NOTE 11 SAE AS21919 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE CUSHION |
| SURFACE TREATMENT | PASSIVATE BAND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE BAND |
| OVERALL WIDTH | 0.500 INCHES NOMINAL |
| MATERIAL THICKNESS | 0.032 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.359 INCHES MINIMUM AND |
| 1.389 INCHES MAXIMUM |
| DISTANCE FROM LOOP CENTER TO TONGUE END | 1.593 INCHES NOMINAL |
| LOOP INSIDE DIAMETER | 1.798 INCHES MINIMUM AND |
| 1.828 INCHES MAXIMUM |
| TEMP RATING | 212.0 DEG FAHRENHEIT |
| TONGUE HOLE TYPE | ROUND, UNTHREADED |
| DIAMETER | 0.218 INCHES MINIMUM AND |
| 0.228 INCHES MAXIMUM |
| CUSHIONING ENVIRONMENTAL PROTECTION | OZONE RESISTANT AND |
| HYDRAULIC FLUID |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP,LOOP TYPE,CUSHIONED SUPPORT |
| SPECIAL FEATURES | FOR GENERAL PURPOSE USE IN AREAS EXPOSED TO PETROLEUM BASED HYDRAULIC FLUIDS AND OCCASIONAL FUEL SPLASH;NOT RESISTANT TO PHOSPHATE ESTER BASED FLUIDS;NOT FOR USE ON TITANIUM TUBING;COLOR SHALL BE BLACK WITH A BLUE IDENTIFIER;BLUE IDENTIFIER SHALL BE A STRIPE EXTENDING LENGTHWISE ALONG BOTH EDGES OF THE CUSHION |
| SPECIFICATION/STANDARD DATA | 0U583-SAE AS21919 NATIONAL STD/SPEC |