| FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 69.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 11.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 39.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 24.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 19.0 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 73.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 139/THREE HOLES |
| FIRST LEG THICKNESS | 3.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 105.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 58.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | 114/TAPERED/ |
| MATERIAL DOCUMENT AND CLASSIFICATION | DIN17100 FED STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1.0112 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 27.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 85.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 42.5 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 140/THREE HOLES |
| SECOND LEG HOLE DIAMETER | 9.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 15.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 60.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 104/RECTANGLE/SQUARE |
| SECOND LEG THICKNESS | 3.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 105.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | IN THE FIRST THIGH AN ADDITIONAL HOLE WITH 4 MILLIMETERS DIAMETER; AT THE FIRST THIGH A PUT ON PLATE |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | LACQUER |