|
|
|
National Stock Number:
5365-00-565-5316
Federal Supply Class:
5365
National Item Identification Number:
005655316
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 366215-6 | 1RDZ1 | BE AEROSPACE CONSUMABLES MANAGEMENT DBA CONSUMABLES SOLUTIONS DIV CONSUMABLES SOLUTIONS | | 366215-6 | 8J752 | LAMINATED SHIM CO INC | | 366215-6 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE WIDTH | 1.060 INCHES MINIMUM AND 1.080 INCHES MAXIMUM | | APERTURE LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | OVERALL LENGTH | 2.150 INCHES MINIMUM AND 2.190 INCHES MAXIMUM | | OVERALL WIDTH | 1.260 INCHES MINIMUM AND 1.280 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE OR AMS 5510 ASSN STD 5TH MATERIAL RESPONSE OR AMS 5512 ASSN STD 6TH MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CLASS 1,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE |
|
|