|
|
|
National Stock Number:
5365-00-573-3142
Federal Supply Class:
5365
National Item Identification Number:
005733142
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 3W24210-101 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CONSTRUCTION | ONE-PIECE | | OVERALL THICKNESS | 0.032 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, AFT ROLLER SUPPORT,FLAP CARRIAGE | | REFERENCE DATA AND LITERATURE | T.O. 1C-141B-4-2 FIG 2-5 | | SPECIAL FEATURES | NO HEAT TREATMENT; MATERIAL SPEC PER MIL-S-5059 COMP 301, 1/2 HARD; FINISH PER LAC 0479; FABRICATED PER LAC 1241; FINISH CODE PER LAC G14; MATERIAL SIZE 0.32 THICK BY 2.0 BY 3.0 INCHES |
|
|