|
|
|
National Stock Number:
5905-00-017-4701
Federal Supply Class:
5905
National Item Identification Number:
000174701
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 10528 | 10138 | ASTRONAUTICS CORPORATION OF AMERICA |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 40.0 KILOHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION GRAPH | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION | | SHAFT RUNOUT | 0.002 INCHES | | PILOT DIAMETER RUNOUT | 0.002 INCHES | | SHAFT RADIAL PLAY | 0.0035 INCHES | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.005 INCHES | | MAXIMUM STARTING TORQUE | 1.10 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES | | FIXED TAP QUANTITY PER SECTION | 3 SINGLE SECTION | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 90.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.9683 INCHES MINIMUM AND | | 0.9688 INCHES MAXIMUM | | PILOT LENGTH | 0.0380 INCHES MINIMUM AND | | 0.0400 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.960 INCHES MINIMUM AND | | 0.970 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM | | BODY DIAMETER | 1.062 INCHES MAXIMUM | | BODY LENGTH | 0.750 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.0620 INCHES MAXIMUM | | MOUNTING LIP DEPTH | 0.0880 INCHES MINIMUM AND | | 0.0980 INCHES MAXIMUM | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND | | 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.309 INCHES MINIMUM AND | | 0.371 INCHES MAXIMUM | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL | | MOUNTING METHOD | CLAMP RING | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SPECIAL FEATURES | FOUR QUADRANTS AT 10,000 OHMS EACH | | TEST DATA DOCUMENT | 10138-10528 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|