| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS 1ST SECTION AND 5.0 KILOHMS 2ND SECTION AND 10.0 KILOHMS 3RD SECTION AND 5.0 KILOHMS 4TH SECTION AND 5.0 KILOHMS 5TH SECTION AND 10.0 KILOHMS 6TH SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 125.0 ALL SECTIONS |
| BODY DIAMETER | 1.995 INCHES MINIMUM AND 2.005 INCHES MAXIMUM |
| BODY LENGTH | 3.630 INCHES MAXIMUM |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 6TH SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.04 TO 0.04 1ST SECTION AND -0.10 TO 0.10 2ND SECTION AND -0.10 TO 0.10 3RD SECTION AND -0.10 TO 0.10 4TH SECTION AND -0.10 TO 0.10 5TH SECTION AND -0.10 TO 0.10 6TH SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 4.00 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.08800 INCHES MINIMUM AND 0.09800 INCHES MAXIMUM |
| MOUNTING LIP DIAMETER | 1.99500 INCHES MINIMUM AND 2.00500 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 1.87400 INCHES MINIMUM AND 1.87500 INCHES MAXIMUM |
| PILOT LENGTH | 0.05700 INCHES MINIMUM AND 0.06700 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 1ST SECTION AND -5.0 TO 5.0 2ND SECTION AND -10.0 TO 10.0 3RD SECTION AND -5.0 TO 5.0 4TH SECTION AND -5.0 TO 5.0 5TH SECTION AND -5.0 TO 5.0 6TH SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 350.0 NOMINAL |
| SECTION QUANTITY | 6 |
| SHAFT END PLAY | 0.001 INCHES |
| SHAFT BEARING TYPE | BALL |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| SHAFT LENGTH | 0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |
| SHAFT RADIAL PLAY | 0.0008 INCHES |
| SHAFT RUNOUT | 0.002 INCHES |
| SHAFT STYLE | ROUND |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 175.0 6TH SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 DEG ANGULAR ROTATION 6TH SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 19 TURRET |
| TEST DATA DOCUMENT | 70210-805101 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.06000 INCHES MINIMUM |