| SECTION QUANTITY | 11 |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS 1ST SECTION |
| 7.5 KILOHMS 2ND SECTION |
| 30.0 KILOHMS 3RD SECTION |
| 7.5 KILOHMS 4TH SECTION |
| 20.0 KILOHMS 5TH SECTION |
| 20.0 KILOHMS 6TH SECTION |
| 20.0 KILOHMS 7TH SECTION |
| 20.0 KILOHMS 8TH SECTION |
| 2.0 KILOHMS 9TH SECTION |
| 30.0 KILOHMS 10TH SECTION |
| 30.0 KILOHMS 11TH SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS EQUATION |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 1ST SECTION |
| -1.00 TO 1.00 2ND SECTION |
| -0.65 TO 0.65 3RD SECTION |
| -1.00 TO 1.00 4TH SECTION |
| -1.50 TO 1.50 5TH SECTION |
| -1.50 TO 1.50 6TH SECTION |
| -1.50 TO 1.50 7TH SECTION |
| -1.50 TO 1.50 8TH SECTION |
| -2.00 TO 2.00 9TH SECTION |
| -0.65 TO 0.65 10TH SECTION |
| -0.30 TO 0.30 11TH SECTION |
| SHAFT RUNOUT | 0.002 INCHES |
| LATERAL RUNOUT | 0.001 INCHES |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT BEARING TYPE | BALL |
| SHAFT END PLAY | 0.005 INCHES |
| MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 3.45 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 3.45 INCH-OUNCES |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 ALL SECTIONS |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 100.0 ALL SECTIONS |
| FIXED TAP QUANTITY PER SECTION | 3 2ND SECTION |
| 3 4TH SECTION |
| 1 5TH SECTION |
| 2 6TH SECTION |
| 1 7TH SECTION |
| 2 8TH SECTION |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 38.17 2ND SECTION AND |
| 87.27 2ND SECTION AND |
| 136.37 2ND SECTION |
| 38.17 4TH SECTION AND |
| 87.27 4TH SECTION AND |
| 136.37 4TH SECTION |
| 156.36 5TH SECTION |
| 156.36 6TH SECTION AND |
| 232.72 6TH SECTION |
| 156.36 7TH SECTION |
| 156.36 8TH SECTION AND |
| 232.72 8TH SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 DEG ANGULAR ROTATION ALL SECTIONS |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| PILOT DIAMETER | 0.9688 INCHES NOMINAL |
| PILOT LENGTH | 0.6200 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.968 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0570 INCHES MINIMUM |
| BODY DIAMETER | 1.062 INCHES NOMINAL |
| BODY LENGTH | 2.680 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.0750 INCHES MAXIMUM |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| ACTUATOR TYPE | SINGLE SHAFT |
| SHAFT STYLE | ROUND, FLATTED |
| FIRST FLAT LENGTH | 0.375 INCHES NOMINAL |
| FLAT HEIGHT | 0.105 INCHES NOMINAL |
| SHAFT DIAMETER | 0.1247 INCHES NOMINAL |
| SHAFT LENGTH | 0.437 INCHES NOMINAL |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| MOUNTING METHOD | CLAMP RING |
| TERMINAL TYPE AND QUANTITY | 45 TURRET |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 97942-577R900 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |