5910-00-057-0100 CAPACITOR,FIXED,PLASTIC DIELECTR Index 5910-00-057-0104 CAPACITOR,FIXED,MICA DIELECTRIC

National Stock Number:
5905-00-057-0103

Federal Supply Class:
5905

National Item Identification Number:
000570103

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
6051110112GENERAL DYNAMICS MOTION CONTROL LLC
749-617212205BUNKER RAMO CORP AMPHENOL CONTROLS DIV
7648736P00203538LOCKHEED MARTIN CORPORATION


Techincal Specification:
SECTION QUANTITY1
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.05 TO 0.05 SINGLE SECTION
SHAFT RUNOUT0.001 INCHES
LATERAL RUNOUT0.002 INCHES
PILOT DIAMETER RUNOUT0.001 INCHES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.041
SHAFT BEARING TYPEBALL
MAXIMUM STARTING TORQUE0.70 INCH-OUNCES
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION228.0 SINGLE SECTION AND
219.0 SINGLE SECTION
BODY STYLECYLINDRICAL SERVO MOUNTED
PILOT DIAMETER1.3115 INCHES MINIMUM AND
1.3120 INCHES MAXIMUM
PILOT LENGTH0.1270 INCHES MINIMUM AND
0.1370 INCHES MAXIMUM
UNDERCUT DIAMETER1.315 INCHES MAXIMUM
UNDERCUT WIDTH0.0730 INCHES MINIMUM
BODY DIAMETER1.453 INCHES MAXIMUM
BODY LENGTH1.100 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.4320 INCHES MINIMUM AND
1.4420 INCHES MAXIMUM
MOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND
0.0980 INCHES MAXIMUM
ACTUATOR TYPESINGLE SHAFT
SHAFT STYLEROUND
SHAFT DIAMETER0.120 INCHES NOMINAL
SHAFT LENGTH0.734 INCHES MINIMUM AND
0.766 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
MOUNTING METHODCLAMP RING
TERMINAL TYPE AND QUANTITY8 TURRET
TERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
RELIABILITY INDICATORNOT ESTABLISHED
TEST DATA DOCUMENT03538-7648736 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
OVERALL LENGTH1.866 INCHES NOMINAL
OVERALL DIAMETER1.709 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us