|
|
|
National Stock Number:
5905-00-581-0165
Federal Supply Class:
5905
National Item Identification Number:
005810165
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 499991PC2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 500.000 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.118 INCHES MINIMUM AND 1.132 INCHES MAXIMUM | | BODY LENGTH | 0.555 INCHES MINIMUM AND 0.569 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | OVERALL DIAMETER | 1.312 INCHES NOMINAL | | OVERALL LENGTH | 1.188 INCHES NOMINAL | | MOUNTING METHOD | LOCKING BUSHING | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | NONTURN DEVICE RADIUS | 0.562 INCHES NOMINAL | | SPECIAL FEATURES | 0.500 IN LING BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | SHAFT LENGTH | 0.625 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LENGTH | 0.188 INCHES NOMINAL | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|