|
|
|
National Stock Number:
5905-00-581-6842
Federal Supply Class:
5905
National Item Identification Number:
005816842
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| M22-13-00141FD | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M22/13-00141FD | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | R6416 | 09017 | EDO | | RP501FD101KK | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-22/13 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILR22-13 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 390.0 SINGLE SECTION | | BODY DIAMETER | 10.090 INCHES MAXIMUM | | BODY LENGTH | 3.030 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL HOLE/SLOT MOUNTED | | FIRST FLAT LENGTH | 1.500 INCHES NOMINAL | | FLAT HEIGHT | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM | | OVERALL DIAMETER | 10.675 INCHES MAXIMUM | | OVERALL LENGTH | 3.952 INCHES MAXIMUM | | MAXIMUM STARTING TORQUE | 160.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 240.00 INCH-OUNCES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.880 INCHES NOMINAL | | MOUNTING METHOD | THREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 750.0 HEAT SINK SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 325.0 MINIMUM AND 335.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 20.0 | | SCREW THREAD SERIES DESIGNATOR | UNC | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.373 INCHES MINIMUM AND 0.376 INCHES MAXIMUM | | SHAFT LENGTH | 0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM | | SHAFT STYLE | ROUND, FLATTED | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-22/13 GOVERNMENT SPECIFICATION | | TERMINAL LENGTH | 0.585 INCHES MAXIMUM | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|