|
|
|
National Stock Number:
5905-00-581-7442
Federal Supply Class:
5905
National Item Identification Number:
005817442
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 769-6006 | 89305 | SIMMONDS PRECISION PRODUCTS INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 50.000 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY HEIGHT | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM | | BODY LENGTH | 1.318 INCHES MINIMUM AND 1.338 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS | | BODY WIDTH | 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM | | FEATURES PROVIDED | NONMETALLIC SHAFT | | OVERALL HEIGHT | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM | | OVERALL LENGTH | 1.390 INCHES NOMINAL | | OVERALL WIDTH | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | MOUNTING METHOD | UNTHREADED HOLE | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION | | TERMINAL LENGTH | 12.000 INCHES MINIMUM | | TERMINAL LOCATION | REAR END |
|
|