5910-00-003-2645 CAPACITOR,FIXED,CERAMIC DIELECTR Index 5910-00-003-2651 CAPACITOR,FIXED,CERAMIC DIELECTRIC

National Stock Number:
5930-00-003-2647

Federal Supply Class:
5930

National Item Identification Number:
000032647

Description:
SWITCH,PUSH

Detail:
A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. The actuating device may or may not be an integral part of the switch. The item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes LIGHT-SWITCH; LIGHT-SWITCH ASSEMBLY; SWITCH, BEAM SELECTING, HEADLIGHT; SWITCH, FOOT; SWITCH, INTERLOCK; SWITCH, PRESSURE; SWITCH, PUSH-PULL; SWITCH, SENSITIVE and SWITCH ASSEMBLY. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see STARTER, MOTOR and CONTROLLER, MOTOR.


Manufacturer Information:
6094503-203640LOCKHEED MARTIN CORPORATION
DMS 81030B16236DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)
W2022181640SAFRAN POWER USA, LLC


Techincal Specification:
ACTUATOR COLORBLACK SINGLE ACTUATOR
ACTUATOR DIAMETER0.375 INCHES NOMINAL
ACTUATOR HEIGHT0.325 INCHES NOMINAL
BODY LENGTH0.974 INCHES NOMINAL
BODY STYLEBUSHING MOUNTED
BODY WIDTH0.656 INCHES NOMINAL
BUSHING LENGTH0.500 INCHES NOMINAL
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE100.000 MILLIAMPERES RESISTIVE DC
FEATURES PROVIDEDACTUATOR SEAL
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONEXPLOSION PROOF
INCLOSURE TYPEFULLY INCLOSED
NOMINAL THREAD SIZE0.625 INCHES
NONPILE-UP CONTACT ARRANGEMENT2 TWO CIRCUIT, DOUBLE BREAK/DOUBLE MAKE, ONE POSITION MOMENTARY SINGLE SWITCH UNIT
MAXIMUM VOLTAGE RATING IN VOLTS28.0 DC
MOUNTING METHODTHREADED BUSHING
PRECIOUS MATERIAL AND LOCATIONCONTACTS GOLD
TEST DATA DOCUMENT81349-MIL-S-22885 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS2A
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNEF
TERMINAL TYPE AND QUANTITY8 TAB, SOLDER LUG


Click here to Register for Free 30-day Trial