| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 100.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 200.0 MILLIAMPERES RESISTIVE LOAD AND |
| 20.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 24 SINGLE ACTUATOR |
| STYLE DESIGNATOR | CIRCULAR WAFER, BUSHING MOUNT |
| OVERALL LENGTH | 3.663 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.828 INCHES MAXIMUM |
| OVERALL WIDTH | 1.609 INCHES MAXIMUM |
| INDIVIDUAL SECTION QUANTITY | 7 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| THROW QUANTITY | 24 EACH SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 15.0 DEGREES SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| FIRST FLAT LENGTH | 0.428 INCHES MINIMUM AND |
| 0.448 INCHES MAXIMUM SINGLE ACTUATOR |
| FLAT HEIGHT | 0.211 INCHES MINIMUM AND |
| 0.221 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.247 INCHES MINIMUM AND |
| 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT LENGTH | 0.929 INCHES NOMINAL SINGLE ACTUATOR |
| NONTURN DEVICE TYPE | PIN AT 3:00 O'CLOCK |
| NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL AT 3:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.344 INCHES MINIMUM AND |
| 0.391 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| TEST DATA DOCUMENT | 81349-MILS3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 90.0 DEGREES FROM NONTURN DEVICE SINGLE ACTUATOR |
| OPERATING TEMP RANGE | -65.0 TO 85.0 DEG CELSIUS |