|
|
|
National Stock Number:
5935-00-543-8876
Federal Supply Class:
5935
National Item Identification Number:
005438876
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 345-1 | 60674 | MICROWAVE DEVICES INC | | 6023 | 58880 | MEGGITT (NEW HAMPSHIRE), INC | | UG1052U | 80058 | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM | | KN12-02 | 91836 | WINCHESTER INTERCONNECT CORPORATION | | W41250-A6110-A12 | C0426 | HENSOLDT SENSORS GMBH |
|
Techincal Specification:
| INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.812 INCHES NOMINAL | | OVERALL HEIGHT | 1.000 INCHES NOMINAL | | OVERALL WIDTH | 1.000 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.719 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.719 INCHES NOMINAL | | UNTHREADED MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.625 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | CABLE ENTRANCE DIAMETER | 0.206 INCHES MAXIMUM | | SHELL MATERIAL | COPPER ALLOY | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 52.0 SINGLE MATING END SINGLE CONTACT GROUPING | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80058 | | DESIGN CONTROL REFERENCE | UG1052U |
|
|