|
|
|
National Stock Number:
5935-00-593-6347
Federal Supply Class:
5935
National Item Identification Number:
005936347
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 10135488 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 10947 | 08718 | ITT CANNON ELECTRIC PHOENIX DIV | | 1263000A090 | 00795 | DELTA ELECTRONICS MANUFACTURING CORP | | 150292-0004 | 71468 | ITT CANNON LLC | | 1263000A090 | DG438 | SEMIC RF ELECTRONIC GMBH | | 1665734 | S3002 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH | | 31-4522 | 74868 | AMPHENOL CORPORATION | | ST5M1417-001 | 76301 | THE BOEING COMPANY | | A79-32-2 | 91836 | WINCHESTER INTERCONNECT CORPORATION |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | OVERALL LENGTH | 0.690 INCHES MINIMUM AND | | 0.750 INCHES MAXIMUM | | OVERALL HEIGHT | 0.660 INCHES MINIMUM AND | | 0.720 INCHES MAXIMUM | | OVERALL WIDTH | 0.660 INCHES MINIMUM AND | | 0.720 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.490 INCHES MINIMUM AND | | 0.510 INCHES MAXIMUM | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.600 INCHES MINIMUM AND | | 0.660 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 0.438 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 28 | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | COPPER ALLOY | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT | GOLD | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE | | MATING END QUANTITY | 1 | | CONTACT POSITION ARRANGEMENT STYLE | NONSTD SINGLE MATING END | | SPECIAL FEATURES | CONTACT DESIGNATION TNC | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.100 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | BODY SURFACE GOLD |
|
|