5950-01-480-2110, COIL,ELECTRICAL

National Stock Number:
5950-01-480-2110

Federal Supply Class:
5950

National Item Identification Number:
014802110

Description:
COIL,ELECTRICAL

Detail:
An item generally consisting of one or more turns of wire or similar conductive material (in special cases it may be considered as a partial turn). It is specifically designed to concentrate magnetic flux generated by the flow of an electric current, to induce in itself an electromotive force, and to add or subtract inductive reactance in a circuit. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). For coils wound on resistors which are designed to be inserted into the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC..

Manufacturer Information:

1425PD0011	72314	BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
1425PD0011-001	72314	BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
16631	10581	STANDEX ELECTRONICS INC.

Techincal Specification:

TERMINAL TYPE AND QUANTITY	10 PIN
WINDING QUANTITY	5 SINGLE COMPONENT
INCLOSURE TYPE	FULLY INCLOSED
RATING METHOD	ELECTRICAL SINGLE COMPONENT SINGLE WINDING
WINDING OPERATING VOLTAGE	5.00 AC VOLTS NOMINAL SINGLE COMPONENT 1ST WINDING
	5.00 AC VOLTS NOMINAL SINGLE COMPONENT 2ND WINDING
	5.00 AC VOLTS NOMINAL SINGLE COMPONENT 3RD WINDING
	15.00 AC VOLTS NOMINAL SINGLE COMPONENT 4TH WINDING
	15.00 AC VOLTS NOMINAL SINGLE COMPONENT 5TH WINDING
WINDING OPERATING CURRENT	1.93 AMPERES AC MAXIMUM SINGLE COMPONENT 1ST SECONDARY
	1.20 AMPERES AC MAXIMUM SINGLE COMPONENT 2ND SECONDARY
	0.74 AMPERES AC MAXIMUM SINGLE COMPONENT 3RD SECONDARY
	0.11 AMPERES AC MAXIMUM SINGLE COMPONENT 4TH SECONDARY
	0.25 AMPERES AC MAXIMUM SINGLE COMPONENT 5TH SECONDARY
MOUNTING METHOD	THREADED HOLE SINGLE GROUP
MOUNTING FACILITY QUANTITY	4 SINGLE GROUP
THREAD SERIES DESIGNATOR	UNC SINGLE GROUP
NOMINAL THREAD SIZE	0.138 INCHES SINGLE GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	2.840 INCHES MINIMUM AND
	2.860 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	2.230 INCHES MINIMUM AND
	2.250 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
OVERALL LENGTH	3.350 INCHES MINIMUM AND
	3.410 INCHES MAXIMUM
OVERALL HEIGHT	1.580 INCHES MINIMUM AND
	1.620 INCHES MAXIMUM
OVERALL WIDTH	2.720 INCHES MINIMUM AND
	2.780 INCHES MAXIMUM
RELIABILITY INDICATOR	NOT ESTABLISHED

Click here to Register for Free 30-day Trial