|
|
|
National Stock Number:
5970-00-555-6444
Federal Supply Class:
5970
National Item Identification Number:
005556444
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| AS33731 | 0U583 | SAE INTERNATIONAL | | AS33731 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS3373-A4 | 0U583 | SAE INTERNATIONAL | | MS3373-A4 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS3373-A4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| INSIDE DIAMETER | 0.405 INCHES MINIMUM AND 0.415 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.610 INCHES NOMINAL | | OVERALL HEIGHT | 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL PLASTIC, MIL-P-19833, TYPE GDI-30F | | SPECIAL FEATURES | TAB INCLUDED | | STYLE DESIGNATOR | ROUND, FLAT |
|
|