|
|
|
National Stock Number:
5977-00-556-2029
Federal Supply Class:
5977
National Item Identification Number:
005562029
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 01-22130 | 76468 | MORGANITE INC | | MB12762CEG8866S | 76468 | MORGANITE INC | | MB12762CGRADEEG8866S | 76468 | MORGANITE INC | | MILB3743 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NEMAPUBCB1-1961 | 81705 | NATIONAL ELECTRICAL MFRS ASSN |
|
Techincal Specification:
| ANGLE | 20.0 DEGREES NOMINAL | | BEVEL ANGLE | 15.0 DEGREES NOMINAL | | BODY STYLE | RECTANGULAR COMMUTATOR | | BRUSH SHUNT LENGTH | 4.500 INCHES NOMINAL ALL SHUNTS | | CLIP TYPE | NEMA HAMMER TYPE A | | CONTACT FACE STYLE | BEVELED | | CRITICALITY CODE JUSTIFICATION | MATT AND MDCL | | LENGTH | 2.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MORGANITE INC,GR8866S MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | ELECTROGRAPHITIC | | PERIPHERAL SPEED | 8000 FEET PER MINUTE | | SHUNT POSITION DESIGNATOR | 1 AND 3 AND 7 AND 9 | | SHUNT INSULATION PROVISION AND QUANTITY | 4 UNINSULATED | | SPECIAL FEATURES | CLIP TURNED UP 0.187 IN. H 0.250 IN. W PARALLEL TO REAR OF BRUSH | | WIDTH | 1.250 INCHES NOMINAL | | STYLE DESIGNATOR | SPLIT | | TERMINAL SLOT WIDTH | 0.219 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 STRAIGHT W/SLOT | | THICKNESS | 0.750 INCHES NOMINAL | | TOP STYLE | BEVELED FRONT |
|
|