| BEND ANGLE IN DEG | 12.5 FIRST BEND E-PLANE |
| BEND ANGLE IN DEG | 45.0 SECOND BEND H-PLANE |
| BEND ANGLE IN DEG | 45.0 THIRD BEND H-PLANE |
| CROSS-SECTIONAL SHAPE STYLE | INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR |
| FLANGE CONNECTING FACILITY AND QUANTITY | 8 THREADED HOLE FIRST FLANGE SINGLE CONNECTION FACILITY |
| FLANGE CONNECTING FACILITY AND QUANTITY | 8 UNTHREADED HOLE SECOND FLANGE SINGLE CONNECTION FACILITY |
| FLANGE CONNECTING HOLE DIAMETER | 0.167 INCHES MINIMUM AND 0.171 INCHES MAXIMUM SECOND FLANGE SINGLE CONNECTION FACILITY |
| FLANGE INSIDE HEIGHT | 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM ALL FLANGES |
| FLANGE DEPTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM ALL FLANGES |
| FLANGE INSIDE WIDTH | 0.897 INCHES MINIMUM AND 0.903 INCHES MAXIMUM ALL FLANGES |
| FLANGE OUTSIDE HEIGHT | 1.570 INCHES MINIMUM AND 1.610 INCHES MAXIMUM ALL FLANGES |
| FLANGE OUTSIDE WIDTH | 2.070 INCHES MINIMUM AND 2.110 INCHES MAXIMUM ALL FLANGES |
| FLANGE QUANTITY | 2 |
| FLANGE STYLE | CONTACT TYPE ALL FLANGES |
| FLEXIBILITY | RIGID SINGLE TUBING SEGMENT |
| INSERTION LOSS IN DECIBELS | 0.05 |
| MATERIAL | ALUMINUM ALLOY ALL FLANGE |
| MAXIMUM OPERATING PRESSURE | 10.0 POUNDS PER SQUARE INCH GAGE |
| NOMINAL THREAD SIZE | 0.164 INCHES FIRST FLANGE SINGLE CONNECTION FACILITY |
| SPECIAL FEATURES | AN ADDITIONAL FLANGE ON THE BENT FLANGE END,FLANGE HAS SIX 0.213 IN. DIA. HOLES EQUALLY SPACED ON 4.250 IN. BOLT CIRCLE,OVERALL DIA. OF FLANGE IS 4.750 IN.,TUBING WALL CONSTRUCTION CAN ALSO BE LAMINATED |
| VOLTAGE STANDING WAVE RATIO | 1.10 |
| WAVEGUIDE CENTER TO CENTER DISTANCE | 3.500 INCHES NOMINAL |
| WAVEGUIDE INSIDE HEIGHT | 0.400 INCHES NOMINAL |
| WAVEGUIDE INSIDE WIDTH | 0.900 INCHES NOMINAL |
| WAVEGUIDE OUTSIDE HEIGHT | 0.500 INCHES NOMINAL |
| WAVEGUIDE OUTSIDE WIDTH | 1.000 INCHES NOMINAL |
| WAVEGUIDE LENGTH | 8.179 INCHES NOMINAL |
| STYLE DESIGNATOR | OFFSET BEND TYPE |
| SURFACE TREATMENT | OXIDE FILM ALL TUBING SEGMENT AND FLANGE INSIDE SURFACES |
| SURFACE TREATMENT | PAINT ALL TUBING SEGMENT AND FLANGE OUTSIDE SURFACES |
| THREAD CLASS | 2B FIRST FLANGE SINGLE CONNECTION FACILITY |
| THREAD DIRECTION | RIGHT-HAND FIRST FLANGE SINGLE CONNECTION FACILITY |
| THREAD SERIES DESIGNATOR | UNC FIRST FLANGE SINGLE CONNECTION FACILITY |
| TUBING WALL CONSTRUCTION STYLE | SEAMLESS SINGLE TUBING SEGMENT |