5940-00-898-2670 TERMINAL BOARD Index 2920-00-898-2681 STARTER,ENGINE,ELECTRICAL

National Stock Number:
5990-00-898-2675

Federal Supply Class:
5990

National Item Identification Number:
008982675

Description:
RESOLVER,ELECTRICAL

Detail:
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers.


Manufacturer Information:
3522 500 15408H0203THALES NEDERLAND B.V.
450904-9831D4856NORTHROP GRUMMAN LITEF GMBH DBA LITEF
CR9098000188818KEARFOTT CORPORATION


Techincal Specification:
TRANSFORMATION RATIO EQUALITY IN PERCENT0.1 NOMINAL
COMPENSATION METHODWINDING COMPENSATED
COMPENSATOR TRANSFORMATION RATIO IN PERCENT0.990 ROTOR TO COMPENSATOR NOMINAL
PHASE SHIFT ANGLE IN DEG8.500 OUTPUT TO INPUT NOMINAL
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT10.00 OUTPUT
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT10.00
OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT-0.1 TO 0.1
ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS16.0 CENTIMETER-GRAMS NOMINAL
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS4.0 CENTIMETER-GRAMS NOMINAL
SHOULDER DIAMETER1.0000 INCHES NOMINAL
PILOT DIAMETER0.6250 INCHES NOMINAL
FREQUENCY IN HERTZ400.0 NOMINAL
TERMINAL TYPE AND QUANTITY12 TAB W/SCREW
BODY STYLESTANDARD ROUND C
BODY SIZE11
STATOR INPUT VOLTAGE RATING IN VOLTS26.0 NOMINAL
ZSO RESISTANCE IN OHMS428.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS1960.00 NOMINAL
ZRO IMPEDANCE MAGNITUDE IN OHMS2080.00 NOMINAL
ZRO IMPEDANCE ANGLE IN DEG76.50 NOMINAL
ROTOR DC RESISTANCE IN OHMS420.00 NOMINAL
STATOR DC RESISTANCE IN OHMS305.00 NOMINAL
TRANSFORMATION RATIO0.975 ROTOR TO STATOR NOMINAL
OVERALL LENGTH2.5550 INCHES NOMINAL
FLANGE DIAMETER1.0620 INCHES NOMINAL
FLANGE THICKNESS0.0930 INCHES NOMINAL
UNDERCUT DIAMETER0.9750 INCHES NOMINAL
UNDERCUT WIDTH0.0620 INCHES NOMINAL
PILOT LENGTH0.0620 INCHES NOMINAL
SHOULDER LENGTH0.0620 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE2.0000 INCHES NOMINAL
SHAFT TYPEPINION SINGLE SHAFT
SHAFT DIAMETER0.1872 INCHES NOMINAL SINGLE SHAFT
SHAFT LENGTH0.4930 INCHES NOMINAL SINGLE SHAFT
SPLINE TOOTH QUANTITY21 SINGLE SHAFT
SPLINE TOOTH DIAMETRAL PITCH120 SINGLE SHAFT
TERMINAL LOCATIONREAR
BODY MATERIALSTEEL, CORROSION RESISTING
SHAFT MAXIMUM RADIAL PLAY0.0005 INCHES
SHAFT RADIAL PLAY TEST POINT0.125 INCHES NOMINAL
SHAFT END PLAY0.0005 INCHES MINIMUM AND
0.0015 INCHES MAXIMUM
SHAFT MAXIMUM RUNOUT0.0008 INCHES


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us