| OVERALL LENGTH | 12.750 INCHES |
| OVERALL WIDTH | 8.125 INCHES |
| OVERALL HEIGHT | 7.750 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 1.250 INCHES SINGLE END |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 4.125 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.750 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 6.750 INCHES |
| INCLOSURE FEATURE | DRIPPROOF-15 DEG |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT RATING IN AMPS | 1.600 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| POWER RATING | 0.1666 HORSEPOWER OUTPUT |
| WINDING TYPE | COMPOUND WOUND |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 60.0 AMBIENT DEG CELSIUS AND |
| 50.0 OPERATING DEG CELSIUS |
| COOLING METHOD | AMBIENT AIR |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 1800.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A9 SINGLE STYLE SINGLE END |
| KEYWAY WIDTH | 0.1875 INCHES NOMINAL SINGLE END |
| KEYWAY DEPTH | 0.0937 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.6250 INCHES NOMINAL SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| TEST DATA DOCUMENT | 81349-MIL-M-2511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-M-17556 |