| SHAFT END CHARACTERISTIC | A24 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.0900 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| WINDING TYPE | PERMANENT MAGNET |
| TERMINAL TYPE AND QUANTITY | 1 SOLDER LUG |
| TIME INTERVAL | 3.0 MINUTES MAXIMUM ON AND 1.0 MINUTES MINIMUM OFF |
| TORQUE RATING AND TYPE | 0.2 INCH-OUNCES RUNNING AND 1.1 INCH-OUNCES STALLED |
| DUTY CYCLE | INTERMITTENT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | NONVENTILATED |
| CURRENT RATING IN AMPS | 0.400 SINGLE INPUT |
| CURRENT RATING METHOD | LOAD |
| FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| LENGTH OF SHAFT FROM HOUSING | 0.200 INCHES SINGLE END |
| III OVERALL LENGTH | 1.687 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.781 INCHES |
| OVERALL HEIGHT | 1.000 INCHES |
| OVERALL WIDTH | 0.750 INCHES |
| ROTOR SPEED RATING IN RPM | 20000.0 SINGLE NO LOAD AND 17000.0 SINGLE FULL LOAD |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 0.281 INCHES SINGLE END |