|
|
|
National Stock Number:
5310-00-582-5975
Federal Supply Class:
5310
National Item Identification Number:
005825975
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| SMB287246 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SMB287246 | 95036 | APPLIED DEVICES CORP |
|
Techincal Specification:
| HOLE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM | | OVERALL HEIGHT | 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-746 CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.125 INCHES NOMINAL | | RECESS DEPTH | 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM | | SPECIAL FEATURES | KEY 0.0929 IN. W BY 0.140 IN. FROM CENTERLINE OF BORE TO TOP OF KEY | | STYLE DESIGNATOR | RECESSED |
|
|