|
|
|
National Stock Number:
5310-00-582-5977
Federal Supply Class:
5310
National Item Identification Number:
005825977
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 120394 | 12204 | DAIMLER CHRYSLER | | 120394 | 24617 | GENERAL MOTORS CORP | | 120394 | 31007 | NAVISTAR INTL CORP | | 120394 | 56442 | DIAMOND REO TRUCK CO | | 120394 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 120394 | 7X677 | GENERAL MOTORS LLC | | 201897A | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 4080A | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 34747S7 | 23040 | FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES | | 201897A | 28265 | HERCULES ENGINE CO INC | | 4080A | 28265 | HERCULES ENGINE CO INC | | 61315H | 31007 | NAVISTAR INTL CORP | | 34747S7 | 57526 | FORD MOTOR COMPANY | | 12Z3035-39 | 94135 | NAVAL ORDNANCE STANDARDS | | WA406113 | 01843 | AMBAC INTERNATIONAL CORPORATION | | WAI13CA | 01843 | AMBAC INTERNATIONAL CORPORATION | | W1033 | 72600 | DURA CORP | | MILW1085TYPEA | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS15795-214 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | PC120394 | C7432 | POWER COMPONENTS (DEUTSCHLAND) GMBH |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.406 INCHES NOMINAL | | OVERALL DIAMETER | 0.812 INCHES NOMINAL | | MATERIAL | STEEL OR IRON OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | CADMIUM OR CHROMATE OVERALL | | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
|